Q:
hi, if the vxdiag honda will work on I-HDS and rewrite software? online programming for honda?
A: VXDIAGSHOP engineer confirmed that the vxdiag is compatible with i-HDS & rewrite software and the online programming is available. But we neither provide nor sell the software.
FYI: What is Honda i-HDS?
The i-HDS (Honda Diagnostic System) software is suite for the diagnosis and repair of electronic systems on Honda and Acura automobiles, and for the reprogramming of electronic control units (including, but not limited to, ECMs and PCMs). This software provides access to all Honda and Acura vehicle systems (access to the immobilizer security system requires a Security Professional level software subscription and Vehicle Security Professional [VSP] registration with NASTF).
To use the i-HDS software, you need to purchase one of the convenient subscription options. In addition, you will need a pass-thru Vehicle Communication Device (VCI) that is compliant with SAE J2534-1 and J2534-2 in order to communicate with the vehicle.
Reprogramming with the J2534 Rewrite Application in i-HDS
Included in the i-HDS software suite is a new reprogramming application called J2534 Rewrite. This application is made available to all subscribers of the i-HDS software suite and replaces the previous generation software, J2534 Honda Pass-thru Reprogramming Software.
What interface is compatible with i-HDS?
Denso DST-i
Bosch MVCI
MongoosePro Honda
Dearborn Group d-briDGe Pro
VXDIAG Multi Tool for Honda
Note: Honda HDS HIM clone with double-board is not compatible with i-HDS rewrite software.
2019/02/27
2019/02/25
VXDIAG Multi Tool with 10 boot systems information
Allscanner company has launched a VXDIAG Multi tool with 10 boot systems. Software including: HONDA / GM / VW / FORD / MAZDA / TOYOTA / PIWIS / Subaru / VOLVO / BMW / BENZ.
Current software version:
Toyota Techstream 13.00.022
Honda HDS 3.101.011
FORD IDS 112
GM tech2win 16.02.24, GDS2 2018
VOLVO VIDA 2014D
JLR SDD 153
VW ODIS 4.3.3
MAZDA IDS 112
Benz XENTRY 2018.12
BMW ISTA 4.14.14
PORSCHE PIWIS 18.1
All software are loaded into a 2TB HDD.
The HDD tested ok with laptops like LENOVO T420 T440 X201, DELL E5420 E6420, Panasonic CF53 54 31.
10 boot systems:
www.vxdiagshop.com
Current software version:
Toyota Techstream 13.00.022
Honda HDS 3.101.011
FORD IDS 112
GM tech2win 16.02.24, GDS2 2018
VOLVO VIDA 2014D
JLR SDD 153
VW ODIS 4.3.3
MAZDA IDS 112
Benz XENTRY 2018.12
BMW ISTA 4.14.14
PORSCHE PIWIS 18.1
All software are loaded into a 2TB HDD.
The HDD tested ok with laptops like LENOVO T420 T440 X201, DELL E5420 E6420, Panasonic CF53 54 31.
10 boot systems:
www.vxdiagshop.com
2019/02/24
Mercedes W221 ME9.7 SCN coding with VXDIAG Benz Multi Tool
Here's demo guide on performing Mercedes Benz 221 with control unit ME9.7 online SCN coding by using VXDIAG VCX Benz interface successfully. Here we go for step by step procedure.
Need:
Online SCN coding account
VCX Benz interface (VXDIAG Benz C6 or VXDIAG Multi diagnostic tool with Benz software)
One computer with win7 8 10
[embed]https://youtu.be/5EA_R0AQqT4[/embed]
Procedure:
Run Xentry newest version.
Passenger cars W211 by automatically scanning.
Press "F2" to determine the data.
Again, click on"F2" to determine the data.
DAS is initialized communication layer.
All will be automatically done.
Get the IMPORTANT NOTE on you should ensure enough power supply.
Click on "Quick Test" and "F3".
Click on "ME 9.7", then "F3" after reading the safety notes.
Click on "F1" to back to click on "Control Unit adaptation".
Choose "Variant coding".
Click on "SCN coding" then "F3".
Login with your user name and password.
The 221 ME9.7 SCN coding has been completed successfully, choose "F2" to continue.
You can also choose print the test report.
Click on "ESC" to exit VXDIAG Benz software.
Done.
www.vxdiagshop.com
Need:
Online SCN coding account
VCX Benz interface (VXDIAG Benz C6 or VXDIAG Multi diagnostic tool with Benz software)
One computer with win7 8 10
[embed]https://youtu.be/5EA_R0AQqT4[/embed]
Procedure:
Run Xentry newest version.
Passenger cars W211 by automatically scanning.
Press "F2" to determine the data.
Again, click on"F2" to determine the data.
DAS is initialized communication layer.
All will be automatically done.
Get the IMPORTANT NOTE on you should ensure enough power supply.
Click on "Quick Test" and "F3".
Click on "ME 9.7", then "F3" after reading the safety notes.
Click on "F1" to back to click on "Control Unit adaptation".
Choose "Variant coding".
Click on "SCN coding" then "F3".
Login with your user name and password.
The 221 ME9.7 SCN coding has been completed successfully, choose "F2" to continue.
You can also choose print the test report.
Click on "ESC" to exit VXDIAG Benz software.
Done.
www.vxdiagshop.com
2019/02/20
How to enable VXDIAG BMW Multi Tool F-series Programming Function?
Question:
How to enable BMW F-series programming function with ista-p? I have VXDIAG multi tool with BMW license.
Vxdiagshop.com solution:
1.Open VX Manager-> DoIP Switch
Turn doip status to ON.
Now F-series programming function is enabled.
How to enable BMW F-series programming function with ista-p? I have VXDIAG multi tool with BMW license.
Vxdiagshop.com solution:
1.Open VX Manager-> DoIP Switch
Turn doip status to ON.
Now F-series programming function is enabled.
2019/02/19
How to change VXDIAG VCX NANO JLR SDD Language?
VXDIAG VCX NANO JLR USB/WiFi interface SDD software is multi-language available. Here's the tip to configure language.
Language: English/Japanese/Portuguese/Romanian/Korean/Dutch/Polish/Turkish/Spanish/French/Italian/Croatian/Danish/German/Swedish /Finnish/Slovenian/Czech/Russian/Greek/Chinese
How to change VXDIAG JLR SDD software language?
Go to Settings-> User Preferences->Language, select the language you desired.
Language: English/Japanese/Portuguese/Romanian/Korean/Dutch/Polish/Turkish/Spanish/French/Italian/Croatian/Danish/German/Swedish /Finnish/Slovenian/Czech/Russian/Greek/Chinese
How to change VXDIAG JLR SDD software language?
Go to Settings-> User Preferences->Language, select the language you desired.
2019/02/18
How to change Xentry Language of VXDIAG Benz Multi Tool
Here's the easy steps to change Xentry language of VXDIAG Multi tool and VXDIAG Benz C6 DoIP diagnostic systems.
In Xentry software, press Setting icon
Go to System Settings
General->Setting Language
Select the language you desired
Multi-language available: Bulgarian/ Danish/ Greek/ Spanish/ French/ Italian/ Korean/ Polish/ Romanuan/ Serbo-Croatian/ Turkish/ Czech/ German/ English/ Finish/ Hyngarian/ Japanese/ Dutch/ Portuguese/ Russian/ Swedish/ Chinese
www.vxdiagshop.com
In Xentry software, press Setting icon
Go to System Settings
General->Setting Language
Select the language you desired
Multi-language available: Bulgarian/ Danish/ Greek/ Spanish/ French/ Italian/ Korean/ Polish/ Romanuan/ Serbo-Croatian/ Turkish/ Czech/ German/ English/ Finish/ Hyngarian/ Japanese/ Dutch/ Portuguese/ Russian/ Swedish/ Chinese
www.vxdiagshop.com
2019/02/14
VXDIAG VCX NANO vs. VCX Pro with Multi Brands
What's the difference between VXDIAG VCX NANO series and VCX Pro (green interface with multi-brand software)?
1. VCX NANO interface supports single car brand software only. You cannot add other license to the device.
While you are able to add other car brand software to VXDIAG VCX Pro scanner.
Avaliable car software are: Toyota Techstream, Honda HDS, Ford/Mazda IDS, Volvo VIDA, JLR SDD, GM GDS2/Tech2win,VW ODIS
2.VCX NANO has USB and WiFi version, VCX Pro has USB version only.
Note: Both NANO series and VCX Pro cannot work with BMW, Benz, Subaru SSM, Porsche PIWIS license. For these license, you need VXDIAG Multi Tool series hardware.
1. VCX NANO interface supports single car brand software only. You cannot add other license to the device.
While you are able to add other car brand software to VXDIAG VCX Pro scanner.
Avaliable car software are: Toyota Techstream, Honda HDS, Ford/Mazda IDS, Volvo VIDA, JLR SDD, GM GDS2/Tech2win,VW ODIS
2.VCX NANO has USB and WiFi version, VCX Pro has USB version only.
Note: Both NANO series and VCX Pro cannot work with BMW, Benz, Subaru SSM, Porsche PIWIS license. For these license, you need VXDIAG Multi Tool series hardware.
2019/02/10
VXDIAG Porsche PIWIS3 License and Laptop FAQ
Q: Does VXDIAG Porsche PIWIS3 support French?
A: Yes. You can configure language by yourself.
Q: Can I use my personal computer?
A: No, the computer and the device is bound together. Because The Piwis III is bound with the encrypted chip. If you unplug the hard disk and insert into the other computer, then the software will has no nonsense.
Q: Can i add Porsche piwis3 authorization to the vxdiag full device?
A: Yes, only to VXDIAG FULL multi device. But need to purchase laptop additionally to use with PIWIS3.
But if you buy VXDIAG Porsche PIWIS3 hardware, you are able to add other car brand license.
Q: Can i add Mercedes and BMW and Land Rover license to VXDIAG Porsche PIWIS3 hardware?
A: Yes. it can.
Q: What's the difference between VXDIAG PIWIS2 and PIWIS3?
A: PIWIS3 has all functions of PIWIS2. PIWIS3 supports newer Porsche model with DoIP protocol, PIWIS2 does not.
Q: Is it online access possible for VXDIAG Porsche?
A: Yes, but you need online access account. We don't provide the account.
Q:Will porsche piwis 3 access 2018 GT3 RS and 2016 GT3 RS?
A: Yes. it will.
Q: Will Piwis III renew ECU. Can i pay you for online programming service?
A: PIWIS3 will renew ECU on Porsche. We don't provide online programming service.
Q: Will PIWIS3 do new ECU programming or initialization? It is a Porsche 911 GT3 2015.
A: Yes. It will.
A: Yes. You can configure language by yourself.
Q: Can I use my personal computer?
A: No, the computer and the device is bound together. Because The Piwis III is bound with the encrypted chip. If you unplug the hard disk and insert into the other computer, then the software will has no nonsense.
Q: Can i add Porsche piwis3 authorization to the vxdiag full device?
A: Yes, only to VXDIAG FULL multi device. But need to purchase laptop additionally to use with PIWIS3.
But if you buy VXDIAG Porsche PIWIS3 hardware, you are able to add other car brand license.
Q: Can i add Mercedes and BMW and Land Rover license to VXDIAG Porsche PIWIS3 hardware?
A: Yes. it can.
Q: What's the difference between VXDIAG PIWIS2 and PIWIS3?
A: PIWIS3 has all functions of PIWIS2. PIWIS3 supports newer Porsche model with DoIP protocol, PIWIS2 does not.
Q: Is it online access possible for VXDIAG Porsche?
A: Yes, but you need online access account. We don't provide the account.
Q:Will porsche piwis 3 access 2018 GT3 RS and 2016 GT3 RS?
A: Yes. it will.
Q: Will Piwis III renew ECU. Can i pay you for online programming service?
A: PIWIS3 will renew ECU on Porsche. We don't provide online programming service.
Q: Will PIWIS3 do new ECU programming or initialization? It is a Porsche 911 GT3 2015.
A: Yes. It will.
2019/02/07
Does VXDIAG VCX DoIP JLR come with Pathfinder software?
Q: Does VXDIAG VCX DoIP include Pathfinder software? Can it be updated? Can it configure Electronic module online??
A:
1) Yes, VXDIAG JLR DoIP comes with Pathfinder software for new Jaguar & Land rover.
2) It is upgradable. Update online, don't need to purchase new HDD.
3) Yes, it will program modules online. But online programming requires online account and password. We DON'T provide account.
You can register online account here by yourself.
https://topix.landrover.jlrext.com/topix/vehicle/lookupForm
http://www.vxdiagshop.com
A:
1) Yes, VXDIAG JLR DoIP comes with Pathfinder software for new Jaguar & Land rover.
2) It is upgradable. Update online, don't need to purchase new HDD.
3) Yes, it will program modules online. But online programming requires online account and password. We DON'T provide account.
You can register online account here by yourself.
https://topix.landrover.jlrext.com/topix/vehicle/lookupForm
http://www.vxdiagshop.com
2019/02/04
VXDIAG VCX NANO IDS review on Mazda 6 GH2 2008
New vxdiag test report from a Russian Mazda owner.
Model tested: Mazda 6 2nd generation (GH-series) year 2008
Interface: VXDIAG VCX NANO for Ford/Mazda 2-in-1 USB version
I got it installed and connected to the PC of day 2. I connected everything! it works now! made a couple of screenshots.
It was interesting to see the errors, the errors were displayed, but here it was both joyful and sad. Low pressure error in AT.
On the Internet more detailed decoding:
P0841 Transmission Fluid Pressure Sensor / Switch A Circuit Range Performance
If there is no problem, then just check all the connectors, clean them. It is possible that it was just a one-time failure. If the box does not work correctly (jerks, jerks, slipping), then you need to change the pressure solenoid, it is inside the automatic transmission. Remove the pan (pre-drain the oil) and you will see electro-solenoids sticking out on the side of the brain, this is one of them and there will be “pressure”. I advise you to buy it beforehand and replace it immediately when removing the old one. It is necessary to change it, as it regulates the total pressure in the automatic transmission.
From here I think, pushes from 1st to 2nd, change the solenoid (just what is it? There are several?) Fluid and filter. I tried to erase errors, erased, on a tidy tire pressure icon - went out. So the vxdiag mazda device works. I will now look for where to disable this feature altogether! Also there is the setting of the steering wheel, the internal combustion engine, etc., has not yet understood.
www.vxdiagshop.com
Model tested: Mazda 6 2nd generation (GH-series) year 2008
Interface: VXDIAG VCX NANO for Ford/Mazda 2-in-1 USB version
I got it installed and connected to the PC of day 2. I connected everything! it works now! made a couple of screenshots.
It was interesting to see the errors, the errors were displayed, but here it was both joyful and sad. Low pressure error in AT.
On the Internet more detailed decoding:
P0841 Transmission Fluid Pressure Sensor / Switch A Circuit Range Performance
If there is no problem, then just check all the connectors, clean them. It is possible that it was just a one-time failure. If the box does not work correctly (jerks, jerks, slipping), then you need to change the pressure solenoid, it is inside the automatic transmission. Remove the pan (pre-drain the oil) and you will see electro-solenoids sticking out on the side of the brain, this is one of them and there will be “pressure”. I advise you to buy it beforehand and replace it immediately when removing the old one. It is necessary to change it, as it regulates the total pressure in the automatic transmission.
From here I think, pushes from 1st to 2nd, change the solenoid (just what is it? There are several?) Fluid and filter. I tried to erase errors, erased, on a tidy tire pressure icon - went out. So the vxdiag mazda device works. I will now look for where to disable this feature altogether! Also there is the setting of the steering wheel, the internal combustion engine, etc., has not yet understood.
www.vxdiagshop.com
Subscribe to:
Posts (Atom)