VXDIAG Multi Tool Benz and BMW Software Update to V2019.12

VXDIAG Benz and BMW Multi Tool release new software version in November 2019.


VXDIAG Benz Software V2019.12
Compatible device: VXDIAG Benz C6 , VXDIAG Full and VXDIAG VCX Plus BMW/Benz 1-in 1
Software Version: Xentry V2019.12 in HDD or SSD format
With DTS Monaco software
Multi-Language: Bulgarian, Danish, Greek, Spanish, French, Italian, Korean, Polish, Romanian, Serbo-Croatian, Swedish, Chinese, Czech, German, English, Finnish, Hungarian, Japanese, Dutch, Portuguese, Slovenian, Turkish
Compatible computer: LENOVO T420 T440 X201, DELL E5420 E6420, Panasonic CF53 54 31.
Update Method: by purchasing new HDD/SSD or send back old HDD/SSD to update free



VXDIAG BMW ISTA-D ISTA-P Software
Software version: 
ISTA-D 4.18.20
ISTA-P 3.66.100
ISTA-D Language:
English/ Chinese
ISTA-P Language:
English, Chinese, Czech, Dutch, French, German, Greek, Indonesian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish, Thai, Turkish
Compatible device: VXDIAG Full, VXDIAG BMW Multi Tool
Update Method: by purchasing new HDD/SSD or send back old HDD/SSD to update free

How to solve VXDIAG Full No WiFi Connections Error

Problem:
I have got the vxdiag full with 2TB multi-brand car brand software.
JLR and Porsche WiFi work no problem, but when i run Benz Xentry, it failed to communicate with WiFi (Error: No connections are available).
What can i do?

Solution:
T0 enable WiFi network connection for VXDIAG Full Multi Tool, users have to install NICs driver (Network interface cards driver) for each car software partition. 

www.vxdiagshop.com

 

Mercedes GLK DPF Regeneration using VXDIAG Benz C6: Working 100%

DPF (Diesel Particulate Filter) issue is a common Mercedes Benz diesel problem.
Symptoms
This is a list of symptoms you may notice when there are issues with the DPF.

• Check Engine Light On
• The vehicle goes into limp mode
• Reduced speeds.
• Poor acceleration
• No throttle response
• A decrease in fuel efficiency

The 4S store will charge $1000-$2000 for the PDF regen.  You can force Mercedes DPF regeneration with a professional diagnostic scanner such as Mercedes MB Star Diagnostic. Regeneration can be carried out with the vehicle driving or running but parked.
Our customer has tested VXDIAG Benz C6 scanner on Mercedes GLK W204 DPF Regen, save $2000.
A C6 VCI with latest 2019.09 Benz and BMW add-on software HDD loaded


Follow C6 prompts to perform PDF generation step by step
(On most MB Star Diagnostic scanners, DPF regeneration can be started by going to:
Control Units >
CDI Module >
Activation / Tests / Adaptations >
Manual DPF regeneration )




VXDIAG C6 Benz helps fix some other small problems and show wiring diagram of each modules as well.


It paid for itself already.

www.vxdiagshop.com

VAS6154 Works with ODIS-S and ODIS-E, Confirmed!

VAS6154 and ODIS software customer feedback today:

Question:
VAS6154 are working fine in Odis Service, but Engineering cant see the VAS - You have a solution?

Solution:
vas6154 works with both ODIS-S (ODIS-Service) and ODIS-E (ODIS-Engineering).
Uninstall and install again did the job.
Just the driver then everything works.
*Select diagnostic interface as VAS 6154.


Note: VAS 6154 uses vxdiag solution. Both vas6154 and vxdiag vcx nano 5054 supports WiFi connection.

If you are interested in vas 6154 diagnostic interface, please contact us
Email: sales@vxdiagshop.com
Skype: vxdiag.com
Whatsapp: 0086-18064450969

VXDIAG VCX Pro Small 3-in-1 Multi Tool Review

Received my vxdiag vcx nano pro 3-in-1 small device and finally got it well installed.  Sharing experience here. Hope it helps.

The vcx pro requires heavy computer, knowledge and internet resourcefulness

Get a laptop, load it up with 16gb ram and a 1TB SSD, and spend a day collecting the software for the make of car you're working on. Spend hours building a Windows 7 and win 10 dual boot. Be safe, partition SSD in 100gb chunks, as the software is huge and some won't interact with each other and you have to install multiple copies of windows, weach on their own partition.
After all that, it'll do the work of a $5000 dealership computer /server.
Updated my Ford escapes computers, reset it's entire system and optimized it, and fixed serious issues.
It was neat watching it control everything as it fixed stuff.

FYI:
It is the only VXDIAG VCX Pro interface which is compatible with multi software on one machine.
This default software is GM Ford Mazda 3 in 1. You can choose any three car models  from GM/Ford/Mazda/VW/HONDA/VOLVO/TOYOTA/JLR.

VXDIAG VCX NANO JLR SDD on Win7 32-bit System

Some customer are struggling with installing the JLR SDD software for vxdiag vcx nano interface.  The possible reason is the operating system.
VXDIAG JLR SDD software should be installed on Windows 7 32bit operating system only.
Current latest SDD software goes to V158.


Following are come customer reviews on the operating system:
1)
The software installed and opened up, but I couldn't get it to communicate with the car. The seller organized a time to remote into my computer and investigate the issue, and found the OS to be the problem. I re-imaged my computer with 32bit Windows 7 and ran the installer again and it worked like a dream. This tool is extremely useful. I was able to diagnose why my auto stop/start wasn't working within 2 minutes of opening the diagnostic toolset.

2)  It works as good as the oem equipment and other aftermarket equipment at five to ten times the price.

3) VXDIAG JLR SDD Software is limited to operating on WIN7 or newer 32-bit operating system. Check your computer first. Excellent customer service however.


4) Initially I struggled in installing the software since it has to be installed on windows 7 with 32x operating system which is hard to find these days. However, after installation the software works well. The help provided by the supplier was superb....


See also:
Free Download JLR SDD V158 for VXDIAG VCX NANO

VXDIAG Ford IDS "Entry Point Not Found" Error Solution

Problem:
I was trying to install software IDS on vxdiag vcx nano for Ford. It failed me and gave me error "Entry Point Not Found"
check the error image below:

Solution:
The error is caused by incorrect software version.
You have installed the V115 IDS software.
VXDIAG scanners are not compatible with Ford IDS V115 yet (till Nov. 2019).
The current latest version IDS for vxdiag goes to V114.

Free Download VXDIAG Ford IDS V114 software here
Free Download Ford/Mazda IDS V114.01 for VXDIAG VCX NANO

VXDIAG VCX NANO Toyota GTS Review on Windows 7

Here's the vxdiag vcx nano toyota scanner newbie working experience carried out by a Japanese customer.  Hope it helps.

" I first try to install techstream on Windows 10. It failed me so i changed another Windows 7 laptop.  It worked out.
Installed GTS.
And start GTS (Techstream).

Area is japan

Select Japanese language

What should I do about this?
An error will occur if you do not fill in all the left side.
Dealer name, your name
Code, a
Separate phone numbers and landline numbers with a space.
Country, Japan
Type, other
It was made.
Move to next step.

Click License Registration

Enter the Registration Key that was in the data ...
It was played back. Meaningless.
After Area and Japan, the program ended.

Then move mainmenu.exe to Techstream / bin.

Drag and Drop
There is the same thing, replace it.
And after this it was Registration Key!

Put the key in the attached document into the new key
OK!
done!

The license expires 5000 days. Well over 10 years in 365 days. So much for this computer.
Although not in the description, there is also VX Manager.

This is also an installer, so install it.
This menu

Can you do it other than Toyota?
I selected Toyota and SUBARU


Then connect


Reading lamp, red and blue are also connected.
Blue is flashing.

Connect with ultra-long USB cable

Vehicle connection


OBD II
Let's try it!
This time, from “Menu” “Function” to “Vehicle connection” “Manual model selection”

Press Next

Connected!

Then "health check"

Only timestamp is changed to acquisition.


The past history fault codes came out.

Click the main body

And like this. It ’s like a dealer.

I will try erasing the diagnostic code.

Then "Erase"

The past history fault code have disappeared neatly.
It is very nice to have the little vxdiag toyota scanner to work.

www.vxdiagshop.com