Free Download ODIS 5.1.3 for VXDIAG VCX NANO 5054

Good news!!! ODIS 5.1.3 software has been tested and verified working great with VXDIAG VCX NANO 5054, VCX Pro and VCX plus multi tools.

Software including:
ODIS Service:5.1.3
ODIS VW
ODIS Audi
ODIS Skoda
ODIS Bentley
ODIS Lamborghini
ODIS engineering postsetup 9.0.6
Elsawin 5.3
EKTA 8.0

Multi-language: English/Japanese/Portuguese/Romanian/Korean/Dutch/Polish/Turkish/Spanish/ French/Italian/Croatian/Danish/German/Swedish/Finnish/Slovenian/Czech/Russian/Greek/Chinese
Operating system: Windows 7 32bit/64 bit and Windows 10


Free Download VXDIAG VAG ODIS 5.1.3 Software
https://mega.nz/#F!osxVlSaA!8MHyyShgwdeS01LqvRIcKA

ODIS 5.1.3 Update Feature:
– Estimated remaining times are shown for ECU flash operations.
– Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view,used diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests
– The measured value display has been improved.
– Documents in GFF are displayed in separate windows.
– One message box will be shown at the beginning of the test drive mode.
– GFF hotfixes can be integrated during diagnostic sessions.
– Danger messages have been revised.
– Stopping of diagnostic sessions may be interrupted.
– Automatic deletion of autosave diagnostic protocols after successful transmission.
– Selection of PassThru diagnostic hardware has been improved.
– ODIS Service Software update has been stabilized.


VXDIAG ODIS 5.1.3 Installation is similar as older 4.4.1 version, here's a video guide

VXDIAG VCX NANO for GM GDS2 Feedback (May 2019)

I bought a vxdiag vcx nano for gm from www.vxdiagshop.com several weeks ago.


Source: http://www.vxdiagshop.com/wholesale/vxdiag-vcx-nano-for-gm-opel.html
Once the software was received, I installed everything and figured out how to use it. First, the Tech2Win must operate as a virtual machine on your computer, so it doesn't matter if you have a 64bit OS (as I do). There are no instructions for this, so this is how I completed the install:
- Install the VM software
- Install the VX software (the VX software is for the diagnostic connector that connects to the car, and takes the place of GM's MDI)
- Use the Tech2 Win auto-install
- Install the GM MDI Manager
- Before you open Tech2 Win, you must first open and run the VX Manger software and connect the vehicle connector to the USB, so the VX manager recognizes it (if you do not do this FIRST, the Tech2 program will not be able to locate the interface, and will display "no communication".
- Open Tech2 Win application directly, it will automatically open via through a virtual machine on your computer passively, there is nothing you need to do with the VM software.
- Once the Tech2 splash screen appears, press enter. You will be prompted to select which MDI the Tech2 software is supposed to recognize (this is why you must run the VX manager first, otherwise there will be no MDI selection present to select).
- Connect to the vehicle and begin polling data
I believe many of the respondents who state this did not work simply couldn't figure out the necessary path. You must install everything, not just parts. The Tech2 looks for the VM software to open, so if you don't install the VM hardware (thinking it's not necessary), it may not function. Also, the VX OBD2 interface and VX manager software must be installed and running before you open the Tech2 application, otherwise the Tech2 won't see an MDI interface (the VX spoofs an MDI serial) for communication.
Once I figured out the necessary path for operation, I am able to use this just as a GM supplied Tech2. You are still limited to model years 1992 - 2013 just as with a Tech2, so don't think you're going to use it on a 2014 - 2018 vehicle as they are not supported by the Tech2win anyhow.
I've been able to get into my 1996 K1500, 2004 CTS-V, 2005 Uplander (programmed the key fobs), and 2013 Cruze with ease. This is the Tech2 software, so you can execute anything a Tech2 can (save for programming a PCM, you need a separate service for that).
All in all, it's a great price for the capabilities you get without the need for a separate hand held device. I used the same laptop which I use all of my performance tuning. I would be hesitant to use this product on a device with personal information, but that's just me.

Ford Mazda IDS V113.01 Verified Working with VXDIAG VCX NANO

Newer version Ford/Mazda IDS V113.01 has been tested and verified working no issue with VXDIAG VCX NANO USB and WiFi interfaces.

Software version: V113.01
Operating system: Win7/Win8/Win10 (Native install, no vmware)
Multi-language:   English,German, French, Italian, Dutch,Spanish, Swedish, Finnish, Danish,Norwegian, Portuguese(European),Portuguese(Brazil)

The IDS V113 software download link will be attached here soon.

The installation guide is similar to V112. Check video guide here:

Free Download VXDIAG VCX NANO GM V2019.02 Software

The new version 2019.02 GDS2 software has been tested and verified working with VXDIAG series scanners.  Hee vxdiagshop.com provides new GDS2 software download for free.

Free Download VXDIAG GM GDS2 2019.02
https://mega.nz/#F!jN4lSYaA!5Q_p4sZEySxLu6HVPP418A

Software & database version:
Saab v2018.3.1
Opel/Vauxhall v2019.2.0
GM Global v2019.2.0
GM China v2018.11.0
Supports part of GM models till 2019

Compatible device: VXDIAG VCX NANO for GM USB/WiFi, VXDIAG VCX Pro and VXDIAG VCX PLUS
Operating system:  Win 7 64 bit/Win 8 64 bit
Multi-language: Czech, Indonesian, Danish,Dutch,English,Spanish,French,Italian,Polish,Portuguese,Romanian,Croatian,Norwegian ,Turkish,Russian,Thai,Japanese,Chinese,Korean


How to install 2019.02 VXDIAG GM GDS2 Software?

Download Software



Run and install Gds2AutoInstall.exe


Install VXManager

Finish install VXManager
Not to start right now
Connect VCX scanner with laptop

Open VX Manager on desktop
Device was well connected

Go to Diagnostic tab, install GDS2/T2W Driver
Press Install


Install GDS2/T2W driver success

Run GM GDS2 software on desktop

Select software language

Click on Diagnostics


Choose device as MDI2
Device is connected and detected

Test Buick Excelle 2010 BCM module
Select 2010->Buick->Excelle->Module Diagnostics->K9 Body Control Module->headlamp type: Halogen (T4A TT4)->Body style
Hatchback->Data Display->select data from list
Check DTC and erase fault codes








Technical support from www.vxdiagshop.com
http://www.vxdiagshop.com/service/install-vxdiag-gm-gds2-v2019-02-software.html

Does VXDIAG Subaru SSM3 Support Spanish?

Q: As titled, will the VXDIAG Subaru SSM3 multi tool support Spanish language (or other language besides English)?

A:
Sorry, VXDIAG Subaru SSM3 supports Chinese and English ONLY.

VXDIAG Subaru SSMIII is now on May Special sale, please check here:
http://www.vxdiagshop.com/wholesale/vxdiag-subaru-ssm-iii-multi-diagnostic-tool.html

VXDIAG VCX NANO Ford IDS V112 verified working on Windows 8 (Native Install)

VXDIAG VCX NANO Ford IDS v112 is verified working without issue on Windows 8 system. Check new feedback from our Spanish customer.

Software version: Ford IDS V112.01
Model tested: Ford Ranger 2002MY 2.3L manual
Operating system: Windows 8
Installation: native install without VMware.  I came across a runtime system error during first installation. Then I installed & run IDS 112 from patch as told by vxdiagshop customer service. Problem solved!!!
Run software without issue.  It allows to access to different models and reset fault codes. Cannot wait to test more functions.
Photo attached:

VXDIAG Benz failed to Auto Connect to Mercedes Solution

Question:
I tried to connect VXDIAG full scanner with a 2005 Mercedes Benz E320  with Vin# WDBUF65J15A706074.  It cannot connect automatically. Device is good, software not problem. Should I choose vehicle model manually?

VXDIAGSHOP solution:
VXDIAG vcx plus multi tool does not always connect automatically, you have to choose the vehicle manually.