VXdiagshop- VXDIAG Scanner Technical Blog

2024/12/08

VXDIAG VCX SE 6154 Setup Guide

Allscanner VXDIAG VCX SE 6154 VW Audi Skoda Seat diagnostic scanner VCI setup guide.

Part 1: Install Driver and Update Firmware

How to install vx manager, driver and update firmware for VCX SE 6154?

Download vx manager here

http://www.vxdiag.net/managecenter/download/vxdiag.zip

set up vxdiag vcx se 6154 1

After installing ODIS software (ODIS installation guide), run VX Manager, select Passthru and 15-VAG-ODIS 6154 driver and press next to finish installing vx manager.

set up vxdiag vcx se 6154 2

Connect VCX SE 6154 with laptop via USB cable.

set up vxdiag vcx se 6154 3

Run VX Manager on the desktop.

There is no device detected. Press-Re-connect. Now it will see your 6154 device.

set up vxdiag vcx se 6154 4
set up vxdiag vcx se 6154 5

If there is a “+” in Firmware, run firmware update.

set up vxdiag vcx se 6154 6

Go to the Diagnostic tab. Check if VW 6154 driver is installed.

set up vxdiag vcx se 6154 7

If there is a purple “+” icon of the driver, you need to update driver.

set up vxdiag vcx se 6154 8
set up vxdiag vcx se 6154 9
set up vxdiag vcx se 6154 10

set up vxdiag vcx se 6154 11

Part 2: Update License.

If software says the License expired.

set up vxdiag vcx se 6154 12
Run VX Manager, check the License.
If the valid day is 0, go back to Device Information and update License.

set up vxdiag vcx se 6154 13
set up vxdiag vcx se 6154 14

If don’t have network connection, VX Manager will say “offline, Download License failed”.

set up vxdiag vcx se 6154 15
set up vxdiag vcx se 6154 16
Close VX Manager.
Connect network.

set up vxdiag vcx se 6154 17 set up vxdiag vcx se 6154 18
Run VX Manager and update license.

set up vxdiag vcx se 6154 19
set up vxdiag vcx se 6154 20
The license won’t expire but needs to be renewed every 60 days.

set up vxdiag vcx se 6154 21

Part 3: How to Connect VXDIAG VCX SE 6154

VCX SE Connects via USB, WiFi and LAN cable.

set up vxdiag vcx se 6154 22

1. Connect via USB

Connect VCX SE with laptop via USB cable, and connect another end to vehicle via OBD socket.

set up vxdiag vcx se 6154 23

Go to Device Manager->Network Adapters. If you see Realtek USB FamilyController, it means the device is well connected.

set up vxdiag vcx se 6154 24

If not, unplug the USB cable and firmly insert the vcx se.

2. Connect via WiFi

Connect VCX SE with the vehicle via OBD port, don’t connect USB cable.

set up vxdiag vcx se 6154 25
Turn on the ignition with working key.

Hit Network icon on the bottom right of your PC.
Find WiFi name DoIP-VCI-XXXX and choose auto connection,
Pair WiFi with password: 12345678

set up vxdiag vcx se 6154 26

set up vxdiag vcx se 6154 27

3. Connect VCX SE with LAN cable

To connect VCX SE via LAN, you also need a USB Type-C to RJ45 LAN converter which is included in the package.

set up vxdiag vcx se 6154 28

Part 4: How to configure VCX SE for Software

How to configure VCX SE 1645 for ODIS Engineering Software?

Configure->Device-> Choose device as VAS 6154

set up vxdiag vcx se 6154 29

How to configure VCX SE 1645 for ODIS Service Software?

Tools->Device-> Choose device as VAS 6154

set up vxdiag vcx se 6154 30

https://www.vxdiagshop.com/service/how-to-set-up-vxdiag-vcx-se-6154.html

2024/12/06

VXDIAG JLR SDD Software Stuck on Configuring Solution

Problem:

Need to diagnose a 2007 Land rover freelancer 2 with VXDIAG VCX SE JLR SDD v165 software, software is stuck on this page and cannot proceed.

Error Legacy/Current vehicle change.

The system needs to reconfigure in order to support current (2010 onward) and Legacy (pre-2010) vehicles.

VXDIAG JLR SDD Software Stuck on Configuring 1

Solution:

The Vxdiagshop.com engineer did a Teamviewer check and found that he had not installed the JLR SDD driver in VX Manager.

So software will stuck on the configuring page. After installing driver, everything goes fine.

2024/12/05

VXDIAG PSA Diagbox Cannot Read Module Citroen C4 Solution

Problem:

It is a Citroen C4 PICASSO C4 SPACETOURER, VIN: VF73ABHZTGJ675964. VXDIAG VCX SE PSA Diagbox 9.85 software detects the VIN automatically then disconnects,and cannot read modules. The program says automatic detection of the vehicle is interrupted.

VXDIAG PSA Diagbox Cannot Read Module Citroen C4 1

Solution:

www.vxdiagshop.com engineer did a Teamviewer check and solved the problem.

Try manually selecting C4 PICASSO instead of auto selection.

Then Diagbox will read module without problem.

2024/12/03

How to Use Techline Connect with VXDIAG VCX FD?

VXDIAG VCX NANO GM and VCX SE don’t support CAN FD protocol. To program modules for new GM CAN FD models via Techline Connect, you will need the new VXDIAG VCX FD J2534 passthru.

Here vxdiagshop.com will show how to set up VXDIAG VCX FD with Techline Connect SPS2 for online programming.

First we are going to get the ACDelco Techline Connect software. We'll just open up your browser type in ACDelcoTDS, go log in or register. If you don't have an account you can click Don't have an account and sign up.

Set up VXDIAG VCX NANO GM with Techline Connect 1

If already have one, go to log in. Scroll down accept the terms and conditions. You can get subscriptions for all the different diagnostic tools.

Any one of these will get you into the TDS software. If you didn't already have a subscription you could click here and add one vehicle.

Set up VXDIAG VCX NANO GM with Techline Connect 2

You'll have to add the VIN for the vehicle but in order to do that first you need the software so if you click on this should bring us up to the page where we can get the software here. We are click on this Download Techline Connect and you should see it start downloading up there.

Set up VXDIAG VCX NANO GM with Techline Connect 3

Set up VXDIAG VCX NANO GM with Techline Connect 4

Take a bit, 9 minutes left. Download is done. We can go into our downloads folder and click on that file and it should install the software.

Set up VXDIAG VCX NANO GM with Techline Connect 5

Just hit yes it'll do its thing. It's done. We can hit Finish and it's automatically starting up Techline Connect application.

Set up VXDIAG VCX NANO GM with Techline Connect 6

But we need to launch it through the the browser so we'll just close out of this and it's important to not have this launch Techline Connect as admin checked for some reason it doesn't work if you have that box check off so we'll just hit this launch Techline Connect button and hopefully it'll open up again.

Set up VXDIAG VCX NANO GM with Techline Connect 7

We'll probably have to restart this a few times see it's installing some software updates. We will just close out of that. It's a little bit of a painful process. Now if we close this go back to our admin thing same thing go launch Techline Connect you got to hit yes and you'll see it's in installing updates to all of these software packages here and whenever something like this pops up just keep hitting next or yes or or whatever it takes to get it done for.

Set up VXDIAG VCX NANO GM with Techline Connect 8

We're in so this is where you would connect to the vehicle but the problem is we don't have a j2534 tool yet and that is where we’re going to use the VXDIAG VCX FD GM J2534.

Set up VXDIAG VCX NANO GM with Techline Connect 9

So we'll just close out of this for now and we'll go back to our web browser and open up a new tab. Visit www.vxdiagshop.com or vxdiag.net to download VX Manager Beta 1.8.9 for VCX FD.

VXDIAG VCX FD Techline Connect Cannot Communicate with CAN FD Vehicle 4

Make sure you install the correct vx manager driver for VCX FD. Don’t use regular vx manager for VCX SE/VCX NANO series.

Then go into your downloads folder and it’s a zip file so you got to right click on it Go extract all and and now you’re inside the folder you can just click on this and it should install the software for you. We will run VX Manager 1.8.9 Beta.

Just hit finish and the software will fire up.

Then connect VCX FD adapter with laptop.

It will show up device. Update firmware and license.
VXDIAG VCX FD Techline Connect Cannot Communicate with CAN FD Vehicle 5

Then go to Diagnostic tab to update Passthru driver. Install passthru driver only. Don’t need to install GDS2 driver in vx manager. There is “+” icon means the Passthru driver requires update. If does not have “+” icon, ignore it.

Set up VXDIAG VCX NANO GM with Techline Connect 13

We can close this and go back to our browser. Plug the vcx FD into the vehicle. We’ve got the VCX FD plugged into both the laptop and the OBD2 port in the vehicle.

Let’s back into vehicle programming software, hit View and Add VIN, launch Techline Connect.

Set up VXDIAG VCX NANO GM with Techline Connect 18

It is loading the SPS Program, we can go select vehicle. Then select the VXDIAG J2534 device. Hit continue.

Set up VXDIAG VCX NANO GM with Techline Connect 20 VXDIAG VCX FD Techline Connect Cannot Communicate with CAN FD Vehicle 1

Now you go into this SPS2 tab over here. Click on that and this is where you can program all your modules.

Set up VXDIAG VCX NANO GM with Techline Connect 22

It's already got the VIN of your vehicle. You could manually enter a VIN or you can detect a new vehicle.

We'll go Next. This is where it finds all the controllers on the vehicle. You can scroll down and see all the different modules. Select the module you need to program.

Set up VXDIAG VCX NANO GM with Techline Connect 23

There are many programming examples on our blog.

https://www.vxdiagshop.com/service/how-to-use-vxdiag-vcx-fd-with-techline-connect.html

VXDIAG VCX FD SPS2 Not Connect with Chevrolet Corvette 2021?

Problem:

Set up the vxdiag vcx nano gm j2534 with Techline Connect SPS2. Tried to program ECU module on a Chevrolet Corvette 2021, VIN: 1G1YB3D45M5103363.

If select vcx passthru, it will read VIN, if select MDI, it cannot read VIN.

Firmware and license are up-to-date. Any idea?

VXDIAG SPS2 Not Connect with Chevrolet Corvette 2021 1

VXDIAG SPS2 Not Connect with Chevrolet Corvette 2021 2

VXDIAG SPS2 Not Connect with Chevrolet Corvette 2021 3

Here is the clue.

Chevrolet Corvette 2021 is the new CAN FD model. VXDIAG VCX NANO and VCX SE does not support CAN FD protcol.

The VXDIAF VCX FD GM scanner supports CAN FD communication.

If use VCX FD but still don’t have communication, do the following:

1. Make sure you install the correct vx manager driver for VCX FD

VX Manager 1.8.9 Beta for VCX FD Free Download

Install passthru driver only. Don’t need to install GDS2 driver in vx manager.

www.vxdiagshop.com

2024/12/01

VXDIAG PSA Diagbox 9.85 VCI is Not Connected Solution

Problem:

Got the PSA driver installed and vx manager detected the VXDIAG VCX SE PSA VCI. Followed the instructions to install Diagbox 9.85 but the software did not see VCI. No VCI connection with software and vehicle.

Any solution?

VXDIAG PSA Diagbox 9.85 VCI is Not Connected 1

VXDIAG PSA Diagbox 9.85 VCI is Not Connected 2

Solution:

Vxdiagshop.com technician did a Teamviewer check and found some programs on his system are in conflict with the PSA driver.

Don’t install GM, VAG, Nissan, Ford etc software with Diagbox driver and software.

Install Diagnox 9.85 on a separate laptop or partition.

Check: How to Install and Activate VXDIAG PSA Diagbox 9.85 Software?