Problem:
I can’t connect with cars in DoIP Protocol. I have original Xentry PassThru from Daimler. Cars with normal CAN-bus connected successfully, but cars with DoIP (for example GLA X156 headunit or C-class W206) i have error connection. Xentry shows no resources available in the error description. I tried connecting the VXDIAG VCX SE J2534 unit (without Benz license) via USB, LAN and Wi-Fi. The same problem. In DoIP Switch theoretically, i have DoIP ON and something in hex is displays.
Since summer 2021, DoIP has also been officially supported with Daimler PassThru (Xentry).
It’s supported and based on your hardware. There are some devices that claim that has DOIP but is not possible to make it work with xentry passthru, for example Bosch 560. doip does not work with Xentry PT.
It is hardware dependancy , also there is option for doip when you open the xentry passthru.
Your vci must support doip protocol this is the first thing. Mongoose Pro and Openport DO NOT support DOIP. VXDIAG VCX SE supports DoIP protocol, but you MUST have benz license activated to use full functions. VCX SE j2534 without MB license is not working on Benz DoIP along with Xentry Passthru.
The advice is not to flash with passthru.
With a DOIP device it goes much faster.
For 2022 onwards W206, you also require Zenzefi license.
No comments:
Post a Comment