VXDIAG VCX NANO, VCX SE, VCX Plus, VCX DoIP multi diagnostic tool software and hardware support from vxdiagshop.com
VXDIAG VW Audi Skoda ODIS Service software new version 25.0.1 is available to download for free.
Compatible devices:
VXDIAG VCX SE 6154, VXDIAG VCX DoIP with ODIS license, VAS6154A etc.
Operating system: Windows 10 or more.
Multi-language: Czech, English, German, Spanish, French, Italian, Japanese, Korean, Dutch, Polish, Danish, Thai, Hungarian
Select device type as VAS 6154.
Don’t need to update 6154 driver in the VX Manager.
ODIS 25.0.1 Software Display:
Problem:
Got the VXDIAG VCX SE BMW scanner with 2025.09 ista software. Failed to start BMW E-sys software. It says unable to communicate with server component. Any idea?
Solution:
There are several versions of E-SYS on the hard drive, but only one version can be used for free.
Only E-sys 3.40.0 can be used for free.
The other versions (E-sys 3.7.0, E-sysPlus4 etc) require payment for activation before using.
The latest version of the VXDIAG BMW software has been updated to 2025.09.
Software List:
BMW WIN10
ISTA-D 4.53.40
ISTA-P 68.0.800
ETK 2019.12.12
KSD2
E-SYS 3.40
BMWAi 4.4
INPA 5.00
winkfp 5.3.1
NCS 4.0.1
Contact www.vxdiagshop.com if need to update your BMW software to 2025.09 version.
Need to update BMW driver to V1.5.2 in vx manager to support ISTA 4.53 software.
Problem:
Tried to diagnose a 2001 Citroen Jumper using VXDIAG VCX SE and PSA diagbox software. Version 9.15 only scanned 1 control module and version 9.85 only scanned 5 modules, any idea?
Solution:
VXDIAG J2534 only supports 2006 onwards Citroen Peugeot vehicles.
It does not work properly on -2006 older K-line models. So it is normal if it cannot scan all modules for older models.
Another important point is that install Diagbox software on a separate system or partition. It may conflict with diagnostic software.
As titled, VXDIAG and Mongoose which is a better diagnostic interface for Volvo VDASH software?
Here is the clue.
Mongoose:
VDASH has added support for Mongoose, but it must be an original device.
mongoose clone doesn’t work with VDash. But he works fine with vida.
There’re plenty of various devices on the market, best one are J2534-devices compatible with Super J2534 or Mongoose JLR.
Another option is VXDIAG (VCM II – Rotunda Diagnostics or compatible). The basic diagnostics seem to work, the DIM languages have been tested too. The overall functionality is briefly the same.
Some are reporting that VXDIAG doesn’t work with the VDASH program. Others have tested it and it turns out the program recognizes the adapter and connects to the car without any problems.
Which is better for VDASH?
VXDIAG is slower in P3 CEM pin decoding than DiCE or Mongoose interface, but it works.
We don’t recommend using VXDIAG Volvo for ECU programming (language change, configuration change, engine optimizations).
Using VXDIAG for ECU programing is at your own risk.
Problem:
Failed to update VXDIAG VCX SE Benz license. Error: Update License failed. Retry. Error info 4003. Received invalid data from server. Any solution?
Solution:
1. Change WiFi hotspot then update license again.
2.If still have this error using WiFi hotspot, send device S/N to vxdiagshop.com engineer to check your license status manually.
Then change another wifi hotspot, update VCI firmware and then update license.
Problem:
Tested VXDIAG VCX SE Benz and 2025.03 Xentry software on a 2001 Mercedes W203 270cdi. It only scans a few control units, no all.
Solution:
VXDIAG does not work very well on older K-line Mercedes models pre-2005. Same as openport with xentry.
It is common if it only scans a few control units on these older models.
VXDIAG released new BMW ICOM driver V1.5.2 for ISTA/D 4.53 software.
Compatible with VXDIAG VCX SE BMW, VCX DoIP BMW scanners.
2025.10.17 V1.5.2.251017
BMW ICOM device version update to support ISTA/D 4.53.XX.
Problem:
Got the VXDIAG VCX SE Pro 3 in 1 with Volvo license. When installing the patch for VIDA 2014D, it said VidaMonitor file was not found.
Error: “Windows can’t find the C:/VIDA/VIDAMonitor file. Make sure the name is spelled correctly and try again.” Any idea.
Solution:
This error indicates that the VIDA 2014D software is not installed properly.
Disable anti-virus program.
Reinstall VIDA software.
Customer problem:
His VXDIAG VCX SE Benz and 3rd party xentry software has no communication 2008 Mercedes Benz Spinter. When attempting to install the Benz C6 driver again, it says file check failed. Then tried to uninstall VX MANAGER, while trying to reinstall the VX MANAGER driver and selecting the BENZ driver, the system cannot find XDVCIUpdate.exe file.
Solution:
He reached vxdiagshop.com for help. Our technician discovered remotely that the XDVCIUpdate.exe file had been killed by the antivirus software.
This is not an issue with VXDIAG Benz driver.
Contact the person who installed the software for him.
The file has been removed by the antivirus and cannot be restored. The only solution is to uninstall and then reinstall the software. Remember to disable your antivirus software during the process.
Good news! The VXDIAG Mercedes-Benz Xentry diagnostic software update to a new version – 2025.09 in October 2025.
2025.09 VXDIAG Benz Software List:
Xentry/DAS : 2025.09
DTS Monaco V8.13, 9.02
Starfinder 2022 /2020/2008
WIS 2021.4
EPC 2018.11
Compatible with Zenzefi license (not included).
Compatible device: VXDIAG VCX SE Benz, VCX Benz C6 DoIP
Update by: new HDD/SSD
Contact www.vxdiagshop.com customer service if need a new version HDD/SSD.
This version requires latest VXDIAG Benz driver upgrade.
VXDIAG updated new Benz driver to support 2025.09 xentry diagnostic software on September 26th, 2025.
Sync VCI version to 202509.
