VXDIAG VCX SE Cannot Read JLR DoIP Module Solution

Problem:

The vxdiag vcx se JLR DoIP device only reads VIN and vehicle information of the Range rover L494 MY2017, it cannot access/scan any modules. Any suggestion?

Solution:

Turn on JLR DoIP switch.

If vx manager detects the device but DoIP config shows nothing, restart computer, disconnect vcx se for a few minutes, then plug the device, turn on DoIP switch and try again.

If DoIP switch still not working, there is a problem with the DoIP module. Contact your dealer to see if your vcx se need repair.

VXDIAG VCX SE OBD Indicator Not Turn on Solution

Problem:

My vxdiag vcx se Benz device was not detected by vx manager (no device error). The vx manager version is up-to-date.

OBD indicator on the vcx se unit did not turn on. Any advice?

Solution:

OBD indicator does not turn on which means there is no communication between device and OBD.

Unplug vcx se, connect it with OBD and PC again. It will work.

If OBD indicator still not turning on, this is a faulty device.

Better have your dealer check your device and decide if it requires repair.

www.vxdiagshop.com

How to Solve VXDIAG Renault Register Problem?

Problem:

I have a problem registering vxdiag vcx nano Renault software.

Notice as attached:

“An unhandled exception occurred in the application.

Error Access denied to path .COOp Extra Func .dl”

Solution;

Just press “Continue” and ignore the error message.

You will be able to generate activation key by keygen.

 

Program Colorado 2017 ECM & IMMO by VXDIAG SPS2

 Vehicle Model: Chevrolet COLORADO 2018

ECU type: ACDelco E98

Purpose: programming ECM and Immobilizer system after replacing ECU e98 Delco

 

Steps:

Replace ECU e98 Delco
Programming ECM CALIBRATION FILE
Programming IMMOBILISER System
Job well done.
Powered by (GM TECHLINE CONNECT SPS2) and J2534 Passthru (here VXDIAG VCX SE was used)

 

 

How to Install ODIS-E V17 for VXDIAG VCX SE 6154?

Latest ODIS offboard diagnostic engineering software V17.01 was tested working with VXDIAG 6154 scanners.

 

ODIS E V17.01 can be downloaded free here.

Keygen is not included. If need activation, buy the activation service here. It contains both ODIS-S V23 and ODIS-E V17. Both can be activated free for once.

https://www.vxdiagshop.com/wholesale/vw-audi-software-v23.html

 

 

Version: ODIS Engineering 17.01

Compatible device: VXDIAG VCX SE 6154, VXDIAG VCX NANO 6154 as well as other passthru devices (openport 2, vnci 6154a, godiag j2534 etc)

Operating system: Win10 or later O/S, RAM>4G. Win7 is not supported since this version.

Language: Multi-language

 

How to Install ODIS S V17 for VXDIAG 6154?

 

Video reference

Step 1: Install ODIS-E V17 Setup
Open ODIS-E 17.0.1 folder
Open ODIS-Engineering_17_0_1 folder
Run OffboardDiagSetup-Engineering-17_0_1
Select Setup language

Press Next
Select diagnostic interface as VAS 6154 and press Next

Then software will ask license for activation
Open license.dat from ODIS-E 17.0.1/Patch & License folder

Select Create a folder in the start menu and create shortcuts for all users
Installing Setup until finished

Step 2: Activate ODIS-E
Run Patch & License folder, open 17.0.1 patch folder
Copy all three files from 17.0.1 patch folder and paste to Win11ProW X64/Program Files/OE folder

Send OffboardDiagLauncher_protected from Win11ProW X64/Program Files/OE to desktop

Rename OffboardDiagLauncher_protected desktop shortcut as ODIS E 17.01 and run it

ODIS-E will ask for an activation key
Send the hardware ID to vxdiagshop.com engineer and we will send you back the activation key
Input activation key and press Register

Step 3: Install PostSetup
Open PostSetup_202300619.iso on ODIS-E 17.0.1 folder as Winrar file
Extract PostSetup 202300619 file to Disk E

In ODIS-E 17.01 if we select file location to E:/ODIS_Engineering, it says no valid software configuration.

We do this.
Create a new ODIS Engineer 17.01 folder on disk E, copy ODIS Engineering folder to this new folder.

Select local directory as file:E:/ODIS_Engineering 17.01/, it should be fine.

Select PostSetup language
Wait until postsetup installation finished

Step 4: Exyatct VWMCD

Unzip VWMCD file in 4.VWMCD folder
and extract to C:/ProgramData/OE/MCD-projects-E/VWMCD folder

Step 5: Install Driver.

The U disk contains both ODIS-S and ODIS-E software. Drivers are in the ODIS-S 23.0.1 folder.

Install the corresponding driver like Step5 here.

 

If already installed driver for ODIS-S, don’t need to install same driver for ODIS-E again.

 

Step 6: Run ODIS-E 17

Run ODIS-E 17.01 on desktop
Software is ready to use.

 

www.vxdiagshop.com