Can I Use VXDIAG with Mitsubishi MUT-3 Software?

Does vxdiag scanner works as j2534 passthru for Mitsubishi MUT III diagnostic software?

VXDIAG does not have license for Mitsubishi. Some tested ok as j2534 passthru device. Some don’t. Need luck.

 

Here is the MUT-3 driver for J2534 device. Free to test by your side. You are at your risk.

 

You need to copy the driver folder of vxdiag, open regedit navigate to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\PassThruSupport.04.04 and export the folder vxdiag to your desktop, add any name when ask you.

After remove the vxdiag software. Copy the drivers folder at the same location it was before. And click the reg file from the desktop that you save before.

This way you will have your vxdiag drivers installed without the vxdiag software to control your lisense. vxdiag (for example vcx nano toyota) will work, nothing will change there, and try again with mut-3. if dll files from driver are not locked too it will work.

edit: the drivers folder you need to copy before remove vxdiag soft is here: C:\ProgramData\VCX\Apps\PASSTHRU\

open the folder in programdata\vcx\app\and check if you have toyota folder and save it to desktop, remove vxdiag. and download the ready drivers and reg above.

Run the reg file and try mut-3.