Problem:
I got a problem when trying to do parameter programming with the vxdiag vcx nano ford IDS V121.01. It gave a data error. It cannot be done?
Solution:
Parameter programming requires online subscription.
We don’t provide an online account.
Ford Parameter programming example:
i.e Ford Mondeo 2007
Start New Session-All other-Vehicle Specification
It will show the VIN
Click menu to select -Module Programming-Programming Parameters- Car Configuration Parameter(s)
During Module Programming this module goes through a VIN verification process.
This process compares the VIN in this module with the VIN in other modules on the vehihcle. You may see the VIN verification screen more than once depending upon your response to the question.
Enter the VIN and confirm
Select “Vehicle configuration”-“Retrieve the vehicle configuration data”
Click tick to continue
It will prompt you with the “Module Configuration Battery Support” information
Follow the Ford IDS prompt to set the ignition switch to ON
Operator question
Click tick to continue
Set ignition switch to OFF (Position 0)
Operator Action
Switch the ignition ON
Switch the ignition to off
Press tick to continue
Back to select “Modify and reinstate vehicle configuration data”
Here you can view vehicle configuration data from BCMii(CCF Master module)
And before you modify the configuration data, you would better to download the data file to make a backup.
Select the system data file you want and then click the tick to download
Set the ignition switch to ON
Set ignition switch to OFF(Position 0)
Switch the ignition ON
Download complete
Switch the ignition Off
You can view the vehicle configuration data here
Done!
https://www.vxdiagshop.com/service/ford-parameter-programming-with-ids.html
No comments:
Post a Comment