How to use VXDIAG VCX SE with PCMFlash?

PCMflash software has been tested working fine with vxdiag vcx se j2534 passthru. One of our customers has tested it with the ktm bench dongle.

Vxdiagshop.com engineer has tested it working with the new pcmtuner dongle containing pcmflash with 67 modules.  You can use any vcx se interfaces.  If don’t need software license, go for the vxdiag vcx se hardware unit only.

 

How to set up vxdiag vcx se with pcmflash?

Download VX Manager 1.8.9 on vxdiagshop.com Download area or vxdiag.net

Install vx manager setup

Press Next

Finish installing setup.

Connect vcx se with PC with USB

Run VX Manager from the desktop

Go to Diagnostic tab, install Passthru driver

Check device status

Update firmware and license if it is not the latest version

We have read Mitsubishi Outlander 2006-2012 EVOX ECU 1860A867 E6T70484 ecu successfully with vcx se pcmflash

Connect vxdiag vcx se j2534 with ecu thru godiag full protocol jumper cable follow the wiring diagram

Insert pcmtuner usb dongle with pc

Run pcmflash software

Select interface as VXDIAG J2534

Identify and read ECU

Save ECU data

Done.

If interested in pcmtuner usb dongle and the full jumper, contact www.vxdiagshop.com customer service.

https://www.vxdiagshop.com/service/set-up-vxdiag-vcx-se-with-pcm-flash.html